Ex situ poly(3,4-ethylenedioxythiophene)-sodium dodecyl sulfate-antimony film electrode for anodic stripping voltammetry determination of lead and cadmium

Edgar Nagles, Olimpo García-Beltrán, John Hurtado

Research output: Contribution to journalArticle

4 Scopus citations

Abstract

© 2016 The Authors. A poly(3,4-ethylenedioxythiophene)-sodium dodecyl sulfate coated antimony film electrode PEDOTSDS-SbFE was prepared ex situ and applied to determine Pb(II) and Cd(II) by anodic stripping voltammetry (ASV). The PEDOT-SDS-SbFE exhibited well developed signals for the oxidation of Pb and Cd at -0.12 and -0.40 V respectively, with higher current compared to unmodified electrodes. The optimum parameters for PEDOT-SDS-SbFE preparation consisted in an EDOT 0.01 mol L-1 in KCl 0.1 mol L-1 with SDS 1.0 x 10-3 mol L-1 solution at scanning rate of 50 mVs-1 (10 cycles -0.1 a 1.6 V), 200 mg L-1 Sb(III) in 0.5 mol L-1 HCl at -1.2 V (150 s) and for the determination of Pb(II) and Cd(II) were pH = 4.0 (acetate buffer); Eacc = -1.0 V and tacc = 60 s. The electrode showed good linear behavior in concentration range from 4.5 to 140.0 μg L-1 for both metal ions. The limit of detection (3s) was 0.50 and 0.80 μg L-1 for Pb(II) and Cd(II) respectively. The RSD for a Pb(II) a Cd(II) 47.0 μg L-1 was 1.5% for seven successive assays. The method was validated using model solutions with satisfactory results. The method was applied to the determination of Pb(II) and Cd(II) in commercial mineral water and river water samples.
Original languageAmerican English
Pages (from-to)7507-7518
Number of pages12
JournalInternational Journal of Electrochemical Science
DOIs
StatePublished - 1 Jan 2016
Externally publishedYes

Fingerprint Dive into the research topics of 'Ex situ poly(3,4-ethylenedioxythiophene)-sodium dodecyl sulfate-antimony film electrode for anodic stripping voltammetry determination of lead and cadmium'. Together they form a unique fingerprint.

  • Cite this