Wind Energy Potential in Pillcomarca, Peru

Melchor Dolmos; Doris Esenarro; Ciro Rodriguez; Cesar Minga

doi:10.1109/ACPEE48638.2020.9136262

Wind Energy Potential in Pillcomarca, Peru

Melchor Dolmos, Doris Esenarro, Ciro Rodriguez, Cesar Minga

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

7 Citas (Scopus)

Resumen

The objective is to determine the wind potential for wind energy generation as a clean development mechanism (CDM) based on climatic parameters, wind speed, and local density for six daily shifts in May 2019. The months of April and June were taken as controls. Wind speed measurements were made with a digital anemometer at 3m above the terrain. It was found that the kinetic energy of the wind ranged from 28.2228252 J to 123.48404 J. This was verified when wind power densities were calculated - gross, usable and effective with carbon nanotube blades, with ranges from 842.21 to 1544.84 W/m2; 499.43 to 946.09 W/m2; 336.88 to 617.94 W/m2 and 438.00 to 803.30 W/m2 respectively, projected at 10 and 50 m/s as minimum speed values for each one of them. The wind potential of this area is sufficient for the micro and medium electric wind turbines, and they qualify to be considered as CDM.

Idioma original	Inglés
Título de la publicación alojada	Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020
Editores	Tek-Tjing Lie, Youbo Liu
Editorial	Institute of Electrical and Electronics Engineers Inc.
Páginas	284-288
Número de páginas	5
ISBN (versión digital)	9781728152813
DOI	https://doi.org/10.1109/ACPEE48638.2020.9136262
Estado	Publicada - jun. 2020
Evento	5th Asia Conference on Power and Electrical Engineering, ACPEE 2020 - Chengdu, China Duración: 4 jun. 2020 → 7 jun. 2020

Serie de la publicación

Nombre	Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020

Conferencia

Conferencia	5th Asia Conference on Power and Electrical Engineering, ACPEE 2020
País/Territorio	China
Ciudad	Chengdu
Período	4/06/20 → 7/06/20

Nota bibliográfica

Publisher Copyright:
© 2020 IEEE.

Acceder al documento

10.1109/ACPEE48638.2020.9136262

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Dolmos, M., Esenarro, D., Rodriguez, C., & Minga, C. (2020). Wind Energy Potential in Pillcomarca, Peru. En T-T. Lie, & Y. Liu (Eds.), Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020 (pp. 284-288). Artículo 9136262 (Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ACPEE48638.2020.9136262

Dolmos, Melchor ; Esenarro, Doris ; Rodriguez, Ciro et al. / Wind Energy Potential in Pillcomarca, Peru. Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020. editor / Tek-Tjing Lie ; Youbo Liu. Institute of Electrical and Electronics Engineers Inc., 2020. pp. 284-288 (Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020).

@inproceedings{360de27edc524f8aa2cae5ed98298605,

title = "Wind Energy Potential in Pillcomarca, Peru",

abstract = "The objective is to determine the wind potential for wind energy generation as a clean development mechanism (CDM) based on climatic parameters, wind speed, and local density for six daily shifts in May 2019. The months of April and June were taken as controls. Wind speed measurements were made with a digital anemometer at 3m above the terrain. It was found that the kinetic energy of the wind ranged from 28.2228252 J to 123.48404 J. This was verified when wind power densities were calculated - gross, usable and effective with carbon nanotube blades, with ranges from 842.21 to 1544.84 W/m2; 499.43 to 946.09 W/m2; 336.88 to 617.94 W/m2 and 438.00 to 803.30 W/m2 respectively, projected at 10 and 50 m/s as minimum speed values for each one of them. The wind potential of this area is sufficient for the micro and medium electric wind turbines, and they qualify to be considered as CDM.",

keywords = "Climatic parameters, Renewable energy, Sustainability, Wind energy",

author = "Melchor Dolmos and Doris Esenarro and Ciro Rodriguez and Cesar Minga",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020 ; Conference date: 04-06-2020 Through 07-06-2020",

year = "2020",

month = jun,

doi = "10.1109/ACPEE48638.2020.9136262",

language = "Ingl{\'e}s",

series = "Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "284--288",

editor = "Tek-Tjing Lie and Youbo Liu",

booktitle = "Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020",

address = "Estados Unidos",

}

Dolmos, M, Esenarro, D, Rodriguez, C & Minga, C 2020, Wind Energy Potential in Pillcomarca, Peru. En T-T Lie & Y Liu (eds.), Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020., 9136262, Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020, Institute of Electrical and Electronics Engineers Inc., pp. 284-288, 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020, Chengdu, China, 4/06/20. https://doi.org/10.1109/ACPEE48638.2020.9136262

Wind Energy Potential in Pillcomarca, Peru. / Dolmos, Melchor; Esenarro, Doris; Rodriguez, Ciro et al.
Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020. ed. / Tek-Tjing Lie; Youbo Liu. Institute of Electrical and Electronics Engineers Inc., 2020. p. 284-288 9136262 (Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Wind Energy Potential in Pillcomarca, Peru

AU - Dolmos, Melchor

AU - Esenarro, Doris

AU - Rodriguez, Ciro

AU - Minga, Cesar

PY - 2020/6

Y1 - 2020/6

N2 - The objective is to determine the wind potential for wind energy generation as a clean development mechanism (CDM) based on climatic parameters, wind speed, and local density for six daily shifts in May 2019. The months of April and June were taken as controls. Wind speed measurements were made with a digital anemometer at 3m above the terrain. It was found that the kinetic energy of the wind ranged from 28.2228252 J to 123.48404 J. This was verified when wind power densities were calculated - gross, usable and effective with carbon nanotube blades, with ranges from 842.21 to 1544.84 W/m2; 499.43 to 946.09 W/m2; 336.88 to 617.94 W/m2 and 438.00 to 803.30 W/m2 respectively, projected at 10 and 50 m/s as minimum speed values for each one of them. The wind potential of this area is sufficient for the micro and medium electric wind turbines, and they qualify to be considered as CDM.

AB - The objective is to determine the wind potential for wind energy generation as a clean development mechanism (CDM) based on climatic parameters, wind speed, and local density for six daily shifts in May 2019. The months of April and June were taken as controls. Wind speed measurements were made with a digital anemometer at 3m above the terrain. It was found that the kinetic energy of the wind ranged from 28.2228252 J to 123.48404 J. This was verified when wind power densities were calculated - gross, usable and effective with carbon nanotube blades, with ranges from 842.21 to 1544.84 W/m2; 499.43 to 946.09 W/m2; 336.88 to 617.94 W/m2 and 438.00 to 803.30 W/m2 respectively, projected at 10 and 50 m/s as minimum speed values for each one of them. The wind potential of this area is sufficient for the micro and medium electric wind turbines, and they qualify to be considered as CDM.

KW - Climatic parameters

KW - Renewable energy

KW - Sustainability

KW - Wind energy

UR - http://www.scopus.com/inward/record.url?scp=85088555526&partnerID=8YFLogxK

U2 - 10.1109/ACPEE48638.2020.9136262

DO - 10.1109/ACPEE48638.2020.9136262

M3 - Contribución a la conferencia

AN - SCOPUS:85088555526

T3 - Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020

SP - 284

EP - 288

BT - Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020

A2 - Lie, Tek-Tjing

A2 - Liu, Youbo

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020

Y2 - 4 June 2020 through 7 June 2020

ER -

Dolmos M, Esenarro D, Rodriguez C, Minga C. Wind Energy Potential in Pillcomarca, Peru. En Lie T-T, Liu Y, editores, Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020. Institute of Electrical and Electronics Engineers Inc. 2020. p. 284-288. 9136262. (Proceedings - 2020 5th Asia Conference on Power and Electrical Engineering, ACPEE 2020). doi: 10.1109/ACPEE48638.2020.9136262

Wind Energy Potential in Pillcomarca, Peru

Resumen

Serie de la publicación

Conferencia

Nota bibliográfica

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto